The VCS7027-10 is a relatively compact climate stress chamber that is fully air-cooled.
Download specsheetThis relatively compact unit is ideally suited for rapidly cycling small test pieces, possibly in combination with climate tests. The device is fully air-cooled using an additional condenser mounted on top of the chamber. This allows for quick setup, but the total height of the machine must be taken into account.
This device is suitable for simulating both constant conditions and for applying cyclically varying temperature or climate conditions. Thanks to its extra power, this chamber can compensate for much more heat that may be released inside during the test.
| Dimensions (W x D x H) |
580mm x 620mm x 750mm |
| Transport dimensions (W x D x H) |
870mm x 1895mm x 2300mm |
| Volume | 270L |
| Cable entry | Right 125mm, left 50mm diameter |
| Cooling | Air-cooled |
| Interface | Ethernet interface |
| Electrical connection | 3P+N+PE 400Vac 32A |
| Available options | Window in door |
| Temperature range | -70°C to +180°C |
| Heating rate | 10,0K/min according to IEC 60068-3-5 |
| Cooling rate | 14,5K/min according to IEC 60068-3-5 |
| Maximum heat compensation | 6000W at +20°C and at-20°C |
| Temperature range | +10°C to +95°C |
| Humidity range | 10% to 95% RH |
| Dew point range | +4°C to +94°C/ -3°C to +4°C discontinu |
| Maximum heat compensation | 400W in the range of +25°C to +95°C at a relative humidity up to 90% RH |
Spacious test space with high heating and cooling rates
Relatively compact and fully air-cooled stress chamber
Spacious stress chamber with an additional air-cooled condenser
Incredibly fast thermal stress chamber with spacious test space
On our website, we offer a selection from our assortment. Based on a conversation with our customers, we explore the possible options. It may also be a solution that we purchase your chosen option.
